Skip to main content

Hooker Blackheart BH23110 Gen III Swap Exhaust System - 2.50 Inch

Compatible with 1967-1969 Plymouth® Barracuda®, 1967-1973 Valiant, 1970-1974 Duster, 1971-1972 Dodge® Demon®, 1973-1974 Dart Sport Mopar® A-Body with 108-inch Wheelbase equipped with a Gen III Hemi® V8 engine. This product is not created or sold by Chrysler®.

Part # BH23110

Hooker Blackheart BH23110 Gen III Swap Exhaust System - 2.50 Inch

In Stock
was $510.00
save $51.32
Add to Wishlist
Starting at $41 a month with Learn More


This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle.

See Emissions Details
Finish off your Gen III HEMI® Swap project with the finest exhaust system available for your 1967-1974 A-Body. Features 2.50-inch diameter, 304 stainless steel, zero restriction mufflers, and 304 stainless steel mandrel-bent exhaust tubing. This exhaust system is designed for Gen III HEMI® swap vehicles and bolts directly to BH23104 Shorty Headers. High tuck design for best possible ground clearance on lowered cars. Optional rectangular polished exhaust tips fit below the rear bumper (available separately to replace turndowns). Note: These exhaust systems were specifically designed to be installed with Hooker Blackheart® HEMI® swap engine and transmission mounting components and headers for this same application. Attempts to install these exhaust systems with any other type or combination of engine and transmission mounting components may cause them to not provide their intended ground or vehicle component clearances. Fits Vehicles with 108-inch Wheelbase: 1967-1973 Plymouth® Valiant 1970-1974 Plymouth® Duster 1967-1967 Plymouth® Barracuda® 1973-1974 Dodge® Dart Sport 1971-1972 Dodge® Demon®


  • 2.50-inch 304 stainless steel dual exhaust system with Gen III Hemi® swap
  • Engineered as part of A-body Gen III Hemi® swap system (Blackheart engine mounts, transmission crossmember, headers, and oil pan) for an easy trouble-free engine swap
  • Direct-fit to BH23104 Hooker Blackheart® shorty headers – for easy bolt-on installation
  • Exhaust system is for vehicles with 108-inch wheelbase
  • X-pipe design for deep muscle car moderate to aggressive exhaust tone
  • Designed to work with all popular transmissions
  • 304 stainless steel hand welded construction – for quality, durability, and corrosion resistance
  • High tuck design for maximum ground clearance
  • Includes clamps, hanger hardware, MLS collector gaskets, fasteners, and instructions
  • Limited Lifetime Warranty
Brand Hooker Blackheart
Diameter2.5 inch
Emission Code8
Engine FamilyChrysler Gen III Hemi
Exit PositionDual Out Rear
Material304 Stainless Steel
Muffler Inlet Diameter (in)2.5
Muffler Outlet Diameter (in)2.5
Muffler Quantity2
Product TypeHeader-Back Exhaust Systems
Sound LevelAggressive / Moderate
Tip StyleNot Included
Manufacturer Part NumberBH23107
Part NumberBH23110

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply:

  • If there is a reasonable basis for knowing that emissions are not adversely affected as described in the EPA Tampering Policy dated November 23rd, 2020
  • The resulting vehicle is identical (with regard to all emissions related parts, engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
  • The vehicle is a uncontrolled vehicle - Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
  • An EO legal engine swap kit is utilized (such as a GM EROD)
  • The vehicle is being used for Competition Use Only - Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street

Consumers are responsible for complying with laws prohibiting tampering, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws.

Motor vehicle emissions standards are intended to help achieve and maintain air quality goals that benefit human health and the environment. The U.S. Environmental Protection Agency, the California Air Resources Board, Environment Canada, and other regulatory agencies prohibit the operation of vehicles on public roads that violate applicable emissions standards. The alteration of certified production vehicles to modify, remove, or render inoperable emissions control hardware or software, known as "tampering" is prohibited by the U.S. Clean Air Act and other laws. Tampering with motor vehicles emissions control systems is punishable by substantial monetary penalties.

Supershops is committed to performance parts that allow enthusiasts to modify their vehicles and meet emission requirements. The information provided here is intended to provide general guidance of interest to most consumers. This guidance may not apply to all vehicles or all situations. It is up to each consumer to evaluate his or her own situation and take the steps necessary to comply with applicable laws. The websites listed below have more information about regulations and policies pertaining to motor vehicle emissions. You should also check the regulations applicable to your local area.

EPA Website

CARB Website

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.