Skip to main content
8
Images
Holley

Holley 0-82651SA 650 CFM Aluminum Street HP Carburetor

Part # 0-82651SA Be the first to write a review

650 CFM Aluminum Street HP Mechanical Secondary-4150

Read More

Holley 0-82651SA 650 CFM Aluminum Street HP Carburetor

Free Shipping

In Stock

$598.95

Tire smoking performance has never been so affordable! The all new Aluminum Street HPs weigh up to 40% less and are even easier on your wallet.

Holley is proud to introduce the all new Aluminum Street HP™. They utilize the best features from Holley's Race Bred 4150 HP™ carbs, but are tamed for street and light competition use. The Street HP features an aluminum contoured main body design taken from the race winning 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability and maximum performance. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
The Aluminum Street HP takes all the great features from the race bred HP and the Double Pumper and combines them into the perfect street/strip carburetor.

Features:

  • Aluminum construction for weight savings and long lasting good looks
  • Optimized street/strip calibration for outstanding throttle response and drivability
  • Contoured venturi inlet offers balanced airflow for increased horsepower
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Mechanical secondaries for awesome tire turning performance
  • Dual accelerator pumps for additional fuel under initial acceleration
  • Dual feed fuel inlets for constant high volume fuel delivery
  • Available in 650, 750, 850, and 950 CFM versions
  • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
Brand Holley
Emission Code3
Product TypeCarburetors
WarrantyManufacturer's Limited 90 Day (1 Year with Warranty Registration)
UPC090127731413
Manufacturer Part Number0-82651SA
Part Number0-82651SA
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Instructions for Part # 0-82651SA
Carburetor Numerical Listing for Part #0-82651SA
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16 in. x 5 5/8 in. bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
Manufacturer's Limited 90 Day (1 Year with Warranty Registration): See Details

Have a question about this product?

    Load More
    Reviews

      Your Review

      *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

      Some parts are not legal for use in California or other states with similar regulations.

      Holley 0-82651SA 650 CFM Aluminum Street HP Carburetor
      Holley 0-82651SA 650 CFM Aluminum Street HP Carburetor
      $598.95