Skip to main content
  • Home /
  • Discontinued Product /
  • Holley 19-215 Fuel Cell with Gauge Sender - 20 gal - 10 AN Fittings - Foam - Aluminum - Natural
5
Images
Holley

Holley 19-215 Fuel Cell with Gauge Sender - 20 gal - 10 AN Fittings - Foam - Aluminum - Natural

Part # 19-215 Be the first to write a review

Flat bottom (24" x 20" x 10"). 15 Gallon Capacity with 0-90 OHM Fuel Gauge Sender. Sold as a kit.

Read More

Holley 19-215 Fuel Cell with Gauge Sender - 20 gal - 10 AN Fittings - Foam - Aluminum - Natural

Not Available

Holley Aluminum fuel cells come in a several variations for nearly every race application. They are offered in both flat bottom and rear sump variations to prevent fuel starvation under heavy acceleration. These fuel cells feature -10AN ORB fittings on the feed, return and vent ports, for high flow support and easy plumbing. They are made from 2.5mm thick 5052 TIG welded aluminum, with triangulated mounting tabs for added support and long-term reliability. The Holley aluminum fuel cells contain anti-slosh foam that is pre-cut to accept Holley fuel level senders. This foam is not E-85 compliant and should be removed if that fuel type is used. Compatible with the single and dual in-tank fuel pump modules. Includes 0-90 Ohms (empty-full) fuel level sender that works most aftermarket gauges. Tube design acts a damper for consistent readings. It saves space and eliminates need for a float arm. Has a standard SAE 5-bolt mounting pattern.

Features:

  • Available in 3, 5, 10, 15 and 20-gallon tank sizes & includes 0-90 Ohm sender which works with most aftermarket gauges
  • Offered in both flat bottom or rear sump to help prevent fuel starvation
  • -10AN ORB ports (feed, return, vent) for high flow
  • Readily adaptable -10AN ORB ports to -6AN, -8AN and -12AN avoids cutting and re-welding male weld bungs
  • ORB ports are welded from the inside for a clean look
  • Made from 2.5mm thick 5052 aluminum, Fully TIG welded
  • Modular design to be easily upgraded gives customer flexibility to add options to suit their needs
  • Anti-slosh foam included and pre-cut to clear fuel level sender *NOTE: foam is not E85 compatible*
  • Pre-welded triangulated mounted tabs for added support and easy installation
  • Includes flush-mount aircraft-style cap, fuel sender block-off plate, -10AN plugs and -10AN male adapters
  • 12-bolt flush-mount cap assembly can be upgraded to a billet fuel cap or an in-tank fuel cell pump module
  • 5-bolt fuel sender block-off plate can be removed and a fuel gauge tube level sender can be installed
  • 0-90 Ohms (empty-full) sender works with most aftermarket gauges
  • Sender tube design acts a damper for consistent readings & saves space while eliminating need for a float arm
  • Sender has 8-inch depth (PN: 19-227) for 5 & 10-gallon fuel cells
Brand Holley
Depth (in)10
Emission Code4
Gallon Capacity20
Length24" (2 feet)
MaterialAluminum
Product TypeFuel Cells
QuantitySold as a Kit
Width20"
UPC090127142271
Manufacturer Part Number19-215
Part Number19-215
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Instructions for 19-215
Instructions for 19-228

Have a question about this product?

    Load More
    Reviews

      Your Review

      *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

      Some parts are not legal for use in California or other states with similar regulations.