- Home /
- Ignition & Electrical /
- Ignition Coils /
- MSD IGNITION 8289-KIT Smart Coil "Bigwire" Kit - Red Finish
MSD IGNITION 8289-KIT Smart Coil "Bigwire" Kit - Red Finish
Part # 8289-KIT
Compatible with vehicles equipped with Holley HP and Dominator ECU's and other EFI systems.
Read MorePart # 8289-KIT
MSD IGNITION 8289-KIT Smart Coil "Bigwire" Kit - Red Finish
Compatible with vehicles equipped with Holley HP and Dominator ECU's and other EFI systems.
The MSD Smart Coil Big Wire Kit allows you to run dwell time over 5 milliseconds to gain the most of the Smart Coils. It will allow the coil to produce 50,000 peak voltage and peak energy of 190 millijoules, this means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder to reach the optimal horsepower out of your engine.
It is compatible with Holley EFI and many other aftermarket electronic fuel injection systems and will run on traditional 12 or 16 volt electrical systems found in race applications.
Unique elongated mounting holes accommodate IGN-1A mounting brackets or allow it to bolt in place of an LS coil with 72mm bolt spacing. The MSD Smart Coil will bolt right on to Holley LS cast aluminum valve covers for a super clean look. Available in red or black.
It is compatible with Holley EFI and many other aftermarket electronic fuel injection systems and will run on traditional 12 or 16 volt electrical systems found in race applications.
Unique elongated mounting holes accommodate IGN-1A mounting brackets or allow it to bolt in place of an LS coil with 72mm bolt spacing. The MSD Smart Coil will bolt right on to Holley LS cast aluminum valve covers for a super clean look. Available in red or black.
Features:
- Contains two terminated harnesses with 7-pin connector for easier plug-in to Holley LSx main harness or factory GM LSx harness
- The harnesses are labeled for different engine types for GM and Ford cylinder banks even Holley universal coil near plug harness
- More spark energy than any other IGN-1A smart coil on the market for maximum fuel burn during combustion sequence
- Built-in ignitor for compatibility with Holley EFI and many other aftermarket ECU’s
- Maximum operating voltage of 17 volts – for compatibility with both 12 volt and 16 volt electrical systems found in many performance/race applications
- Same wiring pinout as other IGN-1A coils for easy plugin upgrades
- Elongated mounting holes to allow direct replacement of IGN-1A coils and will bolt in place of factory LS 1/2/3/6/7 coils with 72mm bolt spacing
- Direct bolt-on to Holley cast aluminum LS valve covers with 72mm bolt spacing
- Available in red or black to match your build
| Brand | MSD |
|---|---|
| Color | Red |
| Emission Code | 3 |
| Product Type | Ignition Coil |
| Quantity | Sold as a set of 8 |
| Voltage | 50,000 Volts |
| Warranty | Manufacturer's Limited 1 Year |
| UPC | 090127077368 |
| Manufacturer Part Number | 8289-KIT |
| Part Number | 8289-KIT |
- Big Wire C-N-P Ignition Sub Harness$304.95Qty:
- The most powerful Smart Coil on the market for use with Holley HP and Dominator ECU's and other EFI systems.$149.95Qty:
- The most powerful Smart Coil on the market for use with Holley HP and Dominator ECU's and other EFI systems.$149.95Qty:
- The most powerful Smart Coil on the market for use with Holley HP and Dominator ECU's and other EFI systems.$999.95Qty:
3
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
Manufacturer's Limited 1 Year: See Details
We Suggest
*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.
MSD IGNITION 8289-KIT Smart Coil "Bigwire" Kit - Red Finish
$1,099.95




